Description
1. Low power consumption, product standby time of up to 2 years.
2. Can charge 2500 times continuously after charging once.
3. Can store up to 15 sets of fingerprints, convenient for whole family.
4. IP65 grade waterproof design, even if it is rainy, do not worry about water failure.
5. MICRO USB charging port, can adapt to most Android mobile phone charging lines in the market, eliminating charging troubles.
Instructions:
* This machine can set 2 administrators, the first fingerprint and the second fingerprint, and press the fingerprint sensor 3S in the empty fingerprint state to enter the input state: you can directly enter the first fingerprint (the first administrator), the second Administrators must be authorized by the first administrator before they can be entered; other fingerprints must be authorized by the first or second administrator before they can be entered;
*When no fingerprint is entered, any fingerprint can be unlocked; once the fingerprint is set, the illegal fingerprint cannot be unlocked!
(1). Add fingerprint for the first time (manager): Press and hold the fingerprint sensor for 3 seconds, first the blue light is short, and then the green light flashes and then releases. Point the finger you want to set to the center of the fingerprint. If you successfully collect the data, it will flash a blue light to indicate that you can record a data. If it is not recorded or failed, it will flash a red light to remind the collection. Invalid, need to re-acquisition. Repeat 10 successful fingerprint acquisitions. After 10 completions, the green light will be on, indicating that fingerprints are added. The green light is flashing during the entire process of entering the fingerprint (indicating that the fingerprint is entered), but the lights of multiple colors are not illuminated at the same time. The finger that touches the pressure requires multiple angles to collect, which is beneficial to the expansion of the database , and is helpful for the sensitivity of the judgment!
(2). Add member fingerprint: Add fingerprint when there is already fingerprint: long press the sensor for 3 seconds, the blue light is shorted once and then released, the blue light is long, then enter the administrator (two administrators) Any one of the fingerprints (that is, the first or second fingerprint set), when the input administrator's fingerprint is correct, the indicator light changes from blue to green and blinks. Repeat the first step to complete the fingerprint.
(3). Delete all fingerprints: In any mode, press and hold the sensor for 5 seconds, the blue light will be on for 2 times and then released, and the red light will be on. At this time, the administrator will touch the fingerprint (any one of the two administrators). Next, if the fingerprint recognition is normal, the green light is illuminated and all fingerprints are deleted.
(4). Lock: Press the lock beam in the unlocked state and immediately lock it.
(5). Unlock: In the locked state, input the fingerprint. If the fingerprint is correct, the green light is short, and the lock beam automatically pops up and unlocks. If the fingerprint is incorrect, the red light is short.
(6). Low voltage: When the voltage is equal to or lower than 3.5V, the red indicator light will flash for 15 seconds; if it is always in low power state, it will alarm once every minute.
(7). Charging: The red and green lights flash alternately during the charging process, and the lights are off when fully charged.
Material : Stainless Steel + Electronic Components
Color : Grey
Product Dimension : 4.8 cm x 1.5 cm x 7.5 cm
*Measurements may slightly differ due to manual measurements
SKU Code : 5080300200066
Product Weight : 0.2 kg
Packaging Weight : 0.5 kg
Volumetric Weight : 0.7 kg
NOTE : The heavier weight between Packaging Weight or Volume Metric Weight will be chosen for shipping weight
